ENGINE
1. Working under the mounting plate
(A) of the
cart,
remove the screw (5), lockwasher
(6)
and washer
(7).
See Fig 21.
2. Remove the engine-mounting locknuts
(43) and
and green wires. Pull the wires carefully through
screws (42). Disconnect the mating black, white
the grommets
(8)
before removing the engine.
See Fig 21 and 22.
3 .
Lift the engine carefully and place it on a work
bench.
4. Remove the Field and Wiring Harness, Clamp
and Clutch Housing,
as
instructed on pages 24
and 25.
5 .
Go to Reassembly, page 26, Step 1.
NOTE All sewice to the engine must be performed
by anauthorized HONDA dealer.
Fig 21
0153
Fig 22
VIEW FROM UNDER ENGINE MOUNTING
PLATE
01789
308-269
23