Before You Begin; Water Tank - nutricook STEAMI ST01 User Manual

Table of Contents

Advertisement

Before you begin

1.
Remove and safely discard all packaging materials, tapes and any
temporary labels from inside and outside of the Steami. Ensure
that there is no packaging underneath and around the Steami and
its accessories.
2.
Verify that all parts are accounted for (refer to Pages 9-10 of this
User guide for the full list of what's included)
3.
Place the Steami on a stable, level, clean, heat-resistant, dry
surface and away from external heat sources. Ensure there is
a minimum distance of 10cm of space on both sides and 30cm
above.
4.
Read all Important safeguards and cautionary information in this
User guide. Failure to do so may result in property damage and/or
personal injury.
5.
Follow Care & maintenance instructions in this User guide to clean
the Steami and its accessories before cooking. Ensure that all
surfaces and accessories are dry before using the unit.
*WARNING:
Read this User guide carefully and completely, and retain for future
reference. Failure to adhere to safety instructions may result in serious injury.
12

Water tank

The water tank serves as a reservoir, holding the water supply that is then pumped to the
evaporating plate for steam generation. It holds up to 1L of water that can be used for up
to 1 hour of cooking.
Hole with
silicone cover
Handle
Removing the Water Tank:
Gently pull and slide the water tank
outwards.
Cleaning the Water Tank:
1.
Remove the upper cover and
gently wash all parts with warm
soapy water using a soft cloth
or non-abrasive sponge.
2.
Rinse thoroughly and let it air
dry.
3.
Install the upper cover and
ensure it is properly locked on
all sides.
NOTE:
DO NOT wash the water tank in
the dishwasher.
DO NOT fill the water tank with
other liquids.
Upper cover
Installing the Water Tank:
1.
Before cooking with programs
that use steam, fill the water
tank with fresh distilled water
through the hole located at the
top of the upper cover.
2.
Cover the hole with the silicone
cap and ensure it is tightly
sealed.
3.
Position the water tank on the
base and gently slide it until it
perfectly aligns with the oven
door. Ensure that it fits snugly
to avoid any leaks during the
cooking process.
NOTE:
ALWAYS ensure the water tank
is clean before and after using
the steam air fryer oven.
13

Advertisement

Table of Contents
loading

Table of Contents