Table of Contents
Advertisement
•GPS Mode Switch
When turning on the transmitter, the default mode is the GPS Mode. Turn
off GPS by pressing and holding the button (
drone enters the ATTI mode. Check the icon "
confirm the strength of the GPS signal.
•Return to Home (RTH)
Press the button (
sound and the drone will fly back to the Take-off Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
•Emergency Stop
Press the Emergency Stop button (
for 2 seconds, the motor will stop immediately.
Attention: The Emergency Stop function should only be use during
emergency to avoid any damage or injury.
•Photo/Video
Short press the button (
flashes once, the camera takes one photo.
Short press the button (
flashes slowly, the camera is taking video. Short press again will exit
shooting.
•Speed Switch
Press the button (
Di" indicates Medium Speed and "Di Di Di" indicates High Speed. (The
Medium Speed is default speed mode.)
) to start the RTH, the transmitter makes a beep
) and the icon "
) and the icon "
) once to switch speed. "Di" indicates Low Speed. "Di
-09-
) for 3 seconds, and the
"on the transmitter to
) once, then press again and hold
" on the LCD Screen
" on the LCD Screen
Hide quick links:
Advertisement
Table of Contents
