Count Labels (Ap380 Only) - Primera AP380 User Manual

4D. Count Labels (AP380 only)
Figure 4-3.
By default the AP380 label applicator will begin to count labels. This count will
be displayed on the LCD. If you press any of the buttons on the control panel
the label count will momentarily disappear. It will reappear ten seconds after
the button is pressed. (Figure 4-3)
Recall/
-
+
Mode Reset
Press and hold the "Recall/Reset" button for five seconds to reset the label
counter to zero.
Note:The label counter value will be retained if power is switched off.
Page | 26