Primera AP380 User Manual page 22

3. Place the container on the container idler roller and container drive roller. Orient the
4. Adjust the container guides so the labels will be placed in the desired location on the
5. Once the container guides are
Note: Guides can be removed and
swapped to accommodate
narrower containers. To accomplish
this it is only necessary to remove
one of the guides. See Section 6 for
instructions
Page | 22
container with the top to the left or the right, depending on the orientation of your
labels on the label stock roll.
container. Since it is difficult to get the label stock in the same position each time, we
recommend that you adjust the container relative to the label stock using the
container guides. If you have multiple container/label combinations, it may be useful
to record the distance between the edge of the label stock and the container guides
for each job using the position
scale.
in the correct position use the
thumbscrews to secure them in
place.
.