Table of Contents
Advertisement
15. Fold the leading edge of the liner so the folded edge is in the bottom of the slots on both
liner guides. Tip! We recommend trimming the liner to length with a scissors to minimize
the resulting slack in the liner and to provide a square leading edge to fold.
Liner
Leading Edge
Slot
Fold
Tip: If the liner is slippery and doesn't fold well or stay in the slot, you can tape the liner to
the guides to keep it in place. Use low tack tape that has a long cure period such as blue
painters tape. You may also use the applicator without using the liner rewinder by
removing the liner guides and letting the linder fall over the shaft onto the floor.
Page | 18
Advertisement
Table of Contents
