If You Would Like To Change The Heating Program Temporarily; If You Would Like To Change The Dhw Program Temporarily - Bosch FW 200 Operating Instructions For The User

Boiler energy management system
Table of Contents

Advertisement

US/CA
4.3
If you would like to change the
heating program temporarily
If you go to bed earlier, leave home longer or
come back earlier, you can use the
to set the next operating mode Comfort /
Economy / Frost of the heating program right
away. The heating program is thus changed
temporarily until the next switch point is
reached.
The operating mode switch under
the flap must be in the
(
Fig. 4 [2], page 12).
Start "Come/Go"
B If desired, press dial to change the heating
circuit.
B Briefly press
The next operating mode Comfort / Economy
/ Frost of the heating program is started right
away. The change is shown in the display.
Ending "Come/Go" early
B Briefly press
"Come/Go" is ended and the heating program
resumes.
button
position
button.
button.
Operation with closed flap | 11
4.4
If you would like to change the
DHW program temporarily
If you would like to shower even though your
boiler is currently running in "Eco" mode, you can
use the
button to start hot water heating right
away. The DHW program is thus changed
temporarily.
Starting "DHW single charge"
B Briefly press
button.
The change is shown in the display.
– For hot water heating with a domestic hot
water tank, heating up to the set hot water
temperature occurs for 60 minutes.
– For hot water heating with a combi boiler,
the comfort operation is active for 30
minutes.
See the operating instructions for
the boiler for additional information
about comfort operation.
Ending "DHW single charge" early
B Briefly press
button.
"DHW single charge" is ended and the DHW
program resumes.
6 720 643 262 (2010/05)

Advertisement

Table of Contents
loading

Table of Contents