Constant Room Temperature - Bosch FW 200 Operating Instructions For The User

16 | Operation with open flap
5.3

Constant room temperature

If possible, leave the operating
mode selector in the
Only this way can you benefit from
the full comfort of the heating
program.
If, however, you would like to specify a constant
room temperature for a longer time, then you can
set constant operation with the operating mode
selector.
The following constant room temperature
settings are possible:
: Comfort in permanent operation
•
The controls constantly regulate the set (high)
room temperature for the Comfort operating
mode. (Factory settings): 70 °F (21 °C).
: Economy in permanent operation
•
The controls constantly regulate the set (high)
room temperature for the Economy operating
mode. (Factory settings): 60 °F (15 °C).
: Frost in permanent operation
•
The controls constantly regulates the set
(low) room temperature for the Frost
operating mode. (Factory settings): 42 °F
(5 °C). If the boiler is switched on, there is
frost protection for the system. Please
observe the other notes in the boiler
operating instructions.
NOTICE: Make sure that the lower
room temperature is tolerable for
plants and house pets.
B Open flap.
B If desired, press dial to change the heating
circuit.
B Turn operating mode selector to the desired
position.
6 720 643 262 (2010/05)
position.
You can change the set
temperature with the dial
( section 4.2). If the operating
mode selector is turned, the
changed temperature is discarded.
US/CA