Advertisement
Description
½" NPT-to-½" PT adapter
Particle filter housing
5 um particle filter
Tank particle filter
Tool bag and zip tie
Cable adapter
Sealant tape
Male (plug) quick disconnect
LQ6 male quick disconnect
LQ6 female quick disconnect
Female (socket) quick disconnect
SAE 8 female x 1/2" NPT male straight adapter—
quantity 2
Chiller cable
Required tools
•
Utility knife
•
#2 Phillips screwdriver
•
Pair of adjustable wrenches (up to 38 mm)
•
Protective gloves
•
Safety glasses
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the SMC HRS-040 chiller.
Caution! If not avoided, the following could result in minor or moderate injury.
•
Use protective eye wear and gloves. Follow workplace guidelines for using personal protective
equipment when installing, cleaning, and servicing the product.
Installing the power cord
A certified electrician must install the power cord for the chiller.
1. Have a certified electrician install the power cord by following the instructions in the SMC
Chiller Operation manual.
2. Apply the alarm code label on the upper panel (as shown in the image below).
Installing the SMC HRS-040 Chiller Instruction Sheet
020-103867-02 Rev. 1 (01-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up the SMC HRS-040 chiller
Kit part number
163-185105-XX
Can be found in the particle filter packaging
163-185105-XX
163-185105-XX
163-185105-XX
163-185105-XX
163-185105-XX
163-185105-XX
163-187107-XX
163-187107-XX
163-187107-XX
163-187107-XX
163-187107-XX
163-187107-XX
Can be found with the projector
2
Advertisement
