Advertisement
g) Select the SEL button to display the Communication menu 4.
h) Use the Up/Down buttons to select on.
i)
Select the SEL button to display the Communication menu 5.
j)
Make sure the second line reads 1.
k) Select the SEL button to display the Communication menu 6.
l)
Use the Up/Down buttons to select 9.6 to set the Communication channel to 9600 Baud.
m) To save the settings and return to normal operation, select the Menu button.
Configuring the chiller
Follow these steps to configure the chiller's alarm settings.
1. Select and hold the Menu button three times to navigate through the menus to get to the
AS.01 screen.
2. To turn off the alarm buzzer if the chiller experiences a failure or issue, use the Up/Down
buttons to select off.
3. To prevent the chiller from shutting down if the tank reaches a low level, select the SEL button
to display AS.02.
4. Use the Up/Down buttons to select A.run.
5. To set the maximum coolant temperature, select the SEL button two times to display AS.04.
The default is set to 45.0.
Installing the SMC HRS-040 Chiller Instruction Sheet
020-103867-02 Rev. 1 (01-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up the SMC HRS-040 chiller
10
Advertisement
