BMW X1 Owner's Manual page 88

CONTROLS
The alarm system responds in situations such
as attempts to steal a wheel or when the vehi-
cle is towed.
Interior motion sensor
The vehicle interior is monitored.
The alarm system responds when movement
is detected in the vehicle interior.
The windows must be closed for the system to
function properly.
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion sen-
sor can trigger an alarm, although no unau-
thorized action occurred.
Possible situations for an unwanted alarm:
▷ In car washes.
▷ In duplex garages.
▷ During transport on trains carrying vehicles,
at sea or on a trailer.
▷ With animals in the vehicle.
▷ When the vehicle is locked after start of re-
fueling.
The tilt alarm sensor and the interior motion
sensor can be switched off in such situations.
Switching off the tilt alarm sensor and
interior motion sensor
▷ Press the lock button on the vehicle
key within 10 seconds as soon as
the vehicle is locked.
The indicator light illuminates for approx.
2 seconds and then continues to flash.
▷ After turning off the standby state, an
option to turn off the interior motion sensor
and the tilt alarm sensor will be displayed
on the control display.
The tilt alarm sensor and interior motion sen-
sor are switched off until the vehicle is locked
again.
88
Opening and closing
Online Edition for Part no. 01405A8A536 - VI/23
Ending the alarm
Unlock the vehicle.
If the vehicle is unlocked with the integrated
key, the drive-ready state must subsequently
be turned on via the emergency detection of
the vehicle key.
Window
Safety information
Warning
When operating the windows, body parts and
objects can be jammed. There is a risk of in-
jury or risk of damage to property. Make sure
that the travel path of the windows is clear
while opening and closing.
With the vehicle key
Opening windows
Press and hold the unlock button on
the vehicle key after unlocking.
The windows open for as long as the button
on the vehicle key is pressed.
Closing the windows
With Comfort Access: Press and hold
the lock button on the vehicle key after
locking.
The windows close for as long as the button
on the vehicle key is pressed.
Depending on the vehicle equipment, exterior
mirrors are folded in unless they were folded
in while locking. The exterior mirrors are not
folded in when the hazard warning flashers are
switched on.