BMW X1 Owner's Manual page 204

CONTROLS
Dynamic Stability Control, and thus driving sta-
bility, are limited while accelerating and corner-
ing.
Overview
Button in the vehicle
The My Modes button for activating or
deactivating increased driving dynam-
ics is located on the center console.
Functional requirement
To increase driving dynamics, you must se-
lect the following drive mode via My Modes:
"SPORT".
Activating/deactivating increased
driving dynamics
1. To activate/deactivate increased
driving dynamics, press the My Modes but-
ton on the center console.
2. "SPORT"
The last Dynamic Stability Control setting
applied in this mode is activated.
3. Select the settings icon.
4. "Driving dynamics"
5. "SPORT PLUS"
Increased driving dynamics is activated.
Dynamic Stability Control reactivates automati-
cally when you switch to another drive mode.
204
Driving stability control systems
Online Edition for Part no. 01405A8A536 - VI/23
Display in the instrument cluster
The Dynamic Stability Control indicator
light on the instrument cluster illumi-
nates when increased driving dynamics
is activated.
Automatic program change
Increased driving dynamics deactivates auto-
matically in the following situations, for exam-
ple:
▷ When Distance Control is activated.
▷ In case of a brake intervention by For-
ward Collision Mitigation. Deactivate For-
ward Collision Mitigation as necessary.
▷ If the suspension control system fails.
▷ The vehicle has a flat tire.
Additional information:
Forward Collision Mitigation with brake inter-
vention, refer to page 167.
Drive-off support
Principle
Drive-off support provides the best possible
traction when driving off in certain situations,
e.g., on difficult surfaces like snow or sand.
This function ensures maximum drive power at
low speeds with adapted driving stability.
Activating/deactivating the drive-off
support
1. To activate or deactivate drive-off sup-
port, go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Driving
settings" / "Drivetrain and chassis" / "Drive-
off support".
2. Select the desired setting.
The drive-off support remains active until it is
deactivated or the driving mode is changed.