BMW X1 Owner's Manual page 182

CONTROLS
▷ While Dynamic Stability Control regulates
driving stability.
▷ Immediately following a steering interven-
tion by the vehicle systems.
▷ With manual steering intervention.
▷ When another driver assistance system is
activated, if applicable.
▷ No lane boundaries detected.
▷ When the system limits are reached.
System limits
General information
Follow the system limits in the "Collision warn-
ing systems" chapter.
Functional limitations
The Lane Departure Warning system may be
restricted in the following situations:
▷ In the event of missing, worn, poorly visible,
merging, diverging, or multiple lane boun-
daries such as in construction areas.
▷ With lane boundaries that are covered in
snow, ice, dirt or water.
▷ In tight corners or on narrow roads.
▷ With lane boundaries that are covered by
objects.
▷ When driving very close to the vehicle in
front of you.
▷ Up to 10 seconds after drive-ready state is
switched on via the Start/Stop button.
▷ While Dynamic Stability Control regulates
driving stability.
▷ While Dynamic Stability Control is limited.
A Check Control message may be displayed
when the system is limited. A yellow warning
light also illuminates, depending on national-
market version.
182
Safety
Online Edition for Part no. 01405A8A536 - VI/23
Active Blind Spot Detection
with active return
Principle
The Lane Change Warning system with active
return detects vehicles in your blind spot or ve-
hicles approaching from behind in the adjacent
lane.
An automatic steering intervention helps to
keep the vehicle in its lane.
A possible risk of collision is indicated by vari-
ous warnings, e.g., signaled by warning light
on the exterior mirror.
The sensors monitor the area behind and next
to the vehicle.
The system indicates whether there are vehi-
cles in your blind spot, arrow 1, or approaching
from behind in an adjacent lane, arrow 2. The
warning light in the exterior mirror illuminates
dimly.
The system will warn in the previously named
situations prior to a lane change. The warn-
ing light on the exterior mirror flashes and the
steering wheel vibrates at the set intensity.
Active Blind Spot Detection can be activated
or deactivated on the control display. You can
also configure the warning time.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.