BMW X1 Owner's Manual page 229

The speed value is suggested as the new de-
sired speed to be applied. To apply the speed
value, the corresponding system must be acti-
vated.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Warning
The set speed can be incorrectly adjusted
or called up by mistake. There is a risk of
accident. Adjust the set speed to the traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
Overview
Buttons on the steering wheel
Button Function
Accept suggested speed manually.
Set speed, refer to Cruise Control.
Driver assistance systems
Online Edition for Part no. 01405A8A536 - VI/23
Turning Speed Limit Assistant
on/off
1. To configure the settings for Speed Limit
Assist, go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Driving
settings" / "Driver Assistance" / "Driving" /
"Speed Limit Assistant".
2. Select the desired setting:
▷ "Adjust manually": detected speed limits
can be applied manually.
▷ "Show current limit": current speed lim-
its are displayed without being applied
in the instrument cluster.
▷ "Off": depending on the national-market
version, Speed Limit Info and Speed
Limit Assistant will be turned off.
If necessary, other anticipatory comfort
functions will be turned off.
Additional information:
Speed Limit Info, refer to page 207.
Displays in the instrument cluster
A message is displayed on the instrument
cluster when Speed Limit Assist and a speed
control system are activated.
Icon Function
Detected change of a speed limit with
immediate effect.
Depending on the national-market
version, it is possible to switch be-
tween the units of measurement.
Indicator light illuminates green: the
detected speed limit can be applied
with the SET button.
After it has been applied, a green
checkmark is displayed.
Manual adoption
A detected speed limit can be applied man-
ually to the active speed control system.
CONTROLS
229