BMW X1 Owner's Manual page 287

Fold up the folded cargo area floor.
With mild hybrid technology:
The function is not available. Do not fold the
cargo area floor up.
Additional information:
Mild hybrid technology, refer to page 355.
Removing the cargo floor panel
Without mild hybrid technology:
1. Fold the rear part of the cargo floor panel
forward.
2. Slightly raise the cargo area floor.
3. Pull the cargo area floor back and out of the
brackets and remove.
With mild hybrid technology:
The function is not available. Do not remove
the cargo area floor.
Online Edition for Part no. 01405A8A536 - VI/23
Cargo area
Inserting the cargo floor panel
Proceed in reverse order to insert the cargo
area floor:
1. Position the folded cargo area floor flat at
the mounts.
2. Push the cargo area floor forward into the
mounts. The cargo area floor engages no-
ticeably.
Enlarging the cargo area
Principle
Depending on the equipment version, the
cargo area can be enlarged as follows:
▷ The rear seat backrests can be moved into
an upright loading position using the cargo
setting.
▷ The rear seat backrests can be folded
down.
General information
The rear seat backrest is divided at a ratio of
40–20–40. The side rear seat backrests and
the center section can be folded down sepa-
rately.
The rear seat backrests can be folded down
from the rear.
Safety information
Warning
Vehicle parts can be damaged or body parts
jammed when folding down the rear seat
backrest. There is a risk of injury or risk of
damage to property. Make sure that the area
of movement of the rear seat backrest includ-
ing head restraint is clear when folding down.
CONTROLS
287