Table of Contents
Advertisement
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER
ON: Pedal movement or press the button.
POWER OFF: Automatic shut off after four minutes of inactivity.
ir は
á |
BS
ii: Éad
項 」
SCAN COUNT TIME DIST CAL
FUNCTION
BUTTON:
Press and release to select functions.
Press and hold for four seconds to reset all functions to zero.
FUNCTIONS:
SCAN:
Automatically scans COUNT, TIME, CALORIES, and DISTANCE in sequence with a change
every six seconds. Press and release the button until "SCAN" appears on the display.
COUNT:
Displays the total number of strides you have taken from zero to 9999 strides.
TIME:
Displays the time from one second up to 99:59 minutes.
CALORIES:
Displays the calorie consumption from zero to 9999 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
DISTANCE:
Displays the distance from zero to 999.9 miles.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the button and hold it down for four seconds to reset all functions to zero.
BATTERY
The meter operates with a 1.5v LR44 button cell battery. Replace the battery when you see inconsistencies
in the display.
HOW TO INSTALL AND REPLACE BATTERY:
Battery
a
Cover
I
ee
1. Remove the METER(22) from the Stamina® Compact Strider. Unplug
the SENSOR WIRE(23). Place the METER(22) up-side down as shown
LR44
in the illustration.
7 ai
|
2. Refer to the illustration. Remove the Battery Cover, and then slide out
the old battery.
3. Install
a new button cell battery and cover with the Battery Cover.
Assembly the METER(22) back to the Stamina® Compact Strider.
NOTE:
1. Ultimate disposal of battery should be handled according
to all state and federal laws and regulations.
2. Do not dispose of batteries in fire.
Advertisement
Table of Contents
