Maintenance - Stamina 55-1605 Owner's Manual

OPERATIONAL INSTRUCTIONS
FORWARD AND REVERSE
LOAD LEVEL ADJUSTMENT
The load level of Stamina® Compact Strider can be changed at any
time during your workout. Adjusting your load level will allow you to
ncrease or decrease your intensity level. To increase the load, turn the
TENSION KNOB(21) clockwise. To decrease the load, turn the TENSION
KNOB(21) counterclockwise.
STORAGE
一 人
. To store the Stamina® Compact Strider simply keep it in a clean dry place.
. The Stamina® Compact Strider is approximately 24.3 inches long x 17 inches wide x 11.4 inches tall.
These dimensions will vary. Please measure your Stamina® Compact Strider if exact dimensions are
needed.
N
CD
MAINTENANCE
The safety and integrity designed into the Stamina@ Compact Strider can only be maintained when the
Stamina@ Compact Strider is regularly examined for damage and wear. Special attention should be
given to the following:
1. Adjust the TENSION KNOB(21) and verify that it functions properly and the resistance changes.
2. Verify that the WARNING LABEL (55) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(55) if it is missing or damaged.
. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
. Worn or damaged components must be replaced immediately or the Stamina® Compact Strider
removed from service until repair is made.
. Only Stamina Products supplied components should be used to maintain/repair the Stamina®
Compact Strider.
. Keep your Stamina® Compact Strider clean by wiping it off with an absorbent cloth after use.
ol A WwW
oO)
NOTE: A standard crank extractor tool is required to remove the CRANKS(68) from the AXLE(69).
11