Midea MDF24P1BST User Manual page 13

c
ADDITIONAL FEATURES
Delay+ + + = +
The Delay Time feature allows you to program the dishwasher to
begin the selected wash cycle 2, 4 or 8 hours later.
Press the DELAY control repeatedly to toggle between ( 2h/4h/8h ). The
LED next to the selected time will illuminate.
NOTE: To cancel the Delay feature, press and hold the START control
for 3 seconds to Cancel. To begin the wash cycle immediately, press
START again.
Control Lock+ + + = +
Use to lock all controls and prevent children from accidently changing the
dishwasher cycle or starting the dishwasher.
•
Press and hold for 3 seconds Control Lock to either activate or
cancel the Control Lock option. After the function is selected the control
lock icon will illuminate. If the the function is canceled, the control lock
icon will light off.
d
OPTIONS
Options enhance the wash cycle. Some Options are available with only
certain Wash Cycles. Refer to the "Cycle and Options Charts" to see
which Options are available for the wash cycle you selected.
•
Press the desired Option control(s). The Option control(s)
illuminates to indicate which option(s) have been selected.
Sanitize+ + + = +
WARNING: Only sanitizing cycles have been designed to meet the
requirements for soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all cycles on a certified
machine have passed the sanitization performance test.
The sanitize option sanitizes dishes and glassware in accordance with
NSF International NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for use in licensed
food establishments.
When the Sanitize option is selected, the water temperature will reach
156.2°F (69°C) maximum.
The Sanitize Control illuminates to indicate when the Wash cycle with
the Sanitize option is completed. The light will turn off after the door
has been opened for 30 seconds.
NOTE: It is possible that the water will not reach 156°F (69°C) in the
Sanitize mode, if the temperature of the incoming hot water does not
meet the minimum requirement of 120°F (49°C).
Heated Dry+ + + = +
When the Heated Dry option is selected, the heater will work during
the drying process.
13