Midea MDF24P1BST User Manual page 33

PROBLEM POSSIBLE CAUSE
Grinding,
A hard object or powder
grating, detergent granules have
crunching entered the wash module.
or buzzing
sounds
Beeps Indicates the wash cycle is
completed.
NOTE: A rapid beep
indicates an error
condition.
Used wrong type of
Suds in the
detergent.
Tub
Dishwasher Excessive suds caused by
Leaks using improper detergent.
Dishwasher is not level.
Rinse Aid The Rinse Aid level is low.
light is on
DISHES ARE NOT COMPLETELY CLEAN
PROBLEM POSSIBLE CAUSE
Ineffective or
Food
inferior detergent.
residue
remains
Dishwasher is not
on the
loaded correctly.
dishes
The wrong wash
cycle for the dish
load was selected.
Water
temperature is too
low.
Used incorrect
amount of
detergent.
SOLUTION
IMPORTANT: Clear glass
is hard to see in water.
and could result in a cut
wound.
Using care, remove the
hard object. If the noise
was caused by detergent
granules, the noise should
stop once the detergent is
ground up.
NOTE: If the noise persists
after a complete cycle, call
for service.
This is normal.
See "Error Codes" for
further direction.
Use only detergent
approved for automatic
dishwashers.
Use only detergent
approved for automatic
dishwashers.
Level the Dishwasher. See
Installation Instructions.
Add liquid Rinse Aid.
SOLUTION
Midea recommends Industry leading
detergents, especially in the pod/tab form.
See "Dishwasher Loading."
Select the wash cycle based on the
most difficult soil in the dishwasher load.
If you have some items with heavier
soils, use a heavier washing cycle.
For best results, the temperature of the
incoming water should be a minimum
of 120°F (49°C).
Use a minimum of 1 Tbsp. (15 g)
detergent per load. Heavy soil and/or
hard water generally requires additional
detergent.
33