ELRO IP CAMERA User Manual page 9

Basis function settings
- Change some basic functions here.
-
-
IR Night Vision
- Specify whether the camera should automatically switch between day and night vision.
This can also be switched on and off manually.
Detection alarm settings
- Change detection alarm settings here.
-
-
-
-
Storage settings
- View the capacity of the SD card here. From here, you can also format (empty) the SD card.
Recording settings
- Change the settings for recording on the SD card.
-
-
-
-
Flip screen; rotate the screen when hanging the camera upside down.
Talk mode; Change the direction of a communication conversation.
▪
One-way communication; press and hold the microphone button
to speak through the camera.
▪
Two-way conversation; communicate via smartphone and
camera like a phone call.
Motion
▪
Enable Motion Detection.
▪
Set the sensitivity of motion detection.
▪
Set an area. Change the red box of your choice and save. Press
the ''+'' to add more boxes and save.
▪
Human movement filtering; Enable Human Body detection, the
doorbell will recognise ''human'' movement via AI and send a
specific notification for this.
Sound Detection
▪
Enable Sound Detection.
Alarm Timer Settings
▪
Set a schedule when the camera should record certain detection.
This can be set completely as desired.
Alarm Interval
▪
Set the notification interval. This can be set to 1min, 3min, 5min.
Alarm interval means that, for example, the camera checks for
detection every 1min and sends a notification every minute
when it is present.
Local recording; Specify whether the camera should record or not. The
recorded images are saved on the SD card.
Mute recording; No sound will be recorded.
Recording mode; Change whether the camera should record non-stop
(continuous) or on an event (motion or sound).
Schedule; Set a schedule when the camera should record certain detection.
This can be set completely as desired.
- 8 -