Add Camera - ELRO IP CAMERA User Manual

Full hd outdoor ip camera
Table of Contents

Advertisement

E.
Set a new password. Use 6-20 characters with a combination of letters and numbers. Then
press ''Done''.
F.
Accept all permissions to complete the registration. Once this is done, you can use the
ELRO Home Safe App.
5.2 Login
If you already have an account, you can log in with your details.
A.
Click on ''Log In''.
B.
Enter your country, email address and password.
C.
Check the box next to the Privacy Policy and User Agreement. Press ''Log In''.
D.
Now you are logged in and can use the ELRO Home Safe App.

6. Add camera

The camera can be easily added in three ways. QR-Code, wired or EZ-Mode. Follow the steps
below carefully and the camera will be added to the app within minutes.
6.1 QR Code
a.
Connect the power cable to the camera and plug the adapter into the wall socket. Wait a
few seconds for the camera to say ''ELRO CO7000 Starting Up''. The camera then indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b.
Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c.
In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d.
Select the QR Code option at the top right. This is a default choice and you do not need to
change anything else here.
e.
When you hear ''Please connect the camera to your wifi'', you can tick the box. When this
is checked, you can press the ''Next'' button.
f.
The WiFi name is filled in automatically. Then enter the password of
this network. Press ''Next''.
g.
A QR-Code will now appear on the screen. Hold this QR code
approximately 20 cm in front of the camera so that the camera can
read it.
h.
The camera will say ''Scanning QR-Code successfully'' when it has
succeeded. This is followed by: ''Your Wifi is Connected. Welcome
to using ELRO CO7000 Outdoor Camera''.
After this, press ''I heard a prompt''.
g.
The camera is now automatically added to the app. When the addition is successful, the
app will indicate this. Then press ''Done''.
h.
The camera is now successfully added to the app and will immediately play live images.
- 4 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Co7000

Table of Contents