Table of Contents
Advertisement
6.2 EZ-Modus
a.
Connect the power cable to the camera and plug the adapter into the power socket. Wait a
few seconds until the camera says; ''ELRO CO7000 Starting Up''. Then the camera indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b.
Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c.
In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d.
Press QR-Code at the top right and select EZ-Mode.
e.
When you hear ''Please connect the camera to your wifi'', you can tick the box. When
checked, you can press the ''Next'' button.
f.
The WiFi name is filled in automatically. Then enter the password of this network. Press
''Next''.
g.
The camera is now automatically added to the app. When it has succeeded in connecting,
the camera says: ''Your Wifi is Connected. Welcome to using ELRO CO7000 Outdoor
Camera''. When the addition is successful, the app will indicate this. Then press ''Done''.
h.
The camera is now successfully added to the app and will immediately play live images.
6.3 Cable
a.
Connect the power cable to the camera and plug the adapter into the wall socket. Wait a
few seconds until the camera says; ''ELRO CO7000 Starting Up''. Then the camera indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b.
Then insert a LAN cable into the camera's designated port and connect the camera directly
to the internet router.
b.
Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c.
In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d.
Press QR-Code at the top right and select Cable.
e.
When you hear ''Please connect the camera to your wifi'', you can tick the box. When this
is checked, you can press the ''Next'' button.
g.
The camera is now automatically added to the app. When it has succeeded in connecting,
the camera says: ''Your Wifi is Connected. Welcome to using ELRO CO7000 Outdoor
Camera''. When the addition is successful, the app will indicate this. Then press ''Done''.
h.
The camera is now successfully added to the app and will immediately play live images.
Important
-
Connect to your router/modem's 2.4Ghz WiFi signal.
- 5 -
Advertisement
Table of Contents
Need help?
Do you have a question about the IP CAMERA and is the answer not in the manual?