Huawei PDU8000 User Manual page 37

Dc combiner cabinet

Hide thumbs Also See for PDU8000:

Table of Contents

PDU8000 DC Combiner Cabinet

User Manual

Figure 4-11 Leveling the combiner cabinet

(1) Leveling foot

Step 4 Insert bolts into the mounting holes in the combiner cabinet and support, and

partially tighten the bolts.

Figure 4-12 Partially tightening bolts

Step 5 Use a socket wrench to tighten the bolts in diagonal order.

Step 6 Install anchor baffle plates for the combiner cabinet.

Issue 02 (2022-08-10)

NO TE

● Wrench an anchor bolt clockwise to elevate a cabinet foot, or wrench an anchor bolt

counterclockwise to lower it. The cabinet feet can be adjusted within a range of 0–8

mm.

● To prevent cabinet tilting, adjust all the feet at the four corners instead of one foot.

● Do not remove anchor bolts, because this work brings you only a great deal of

reworking.

Remove a total of four door sill fasteners from the front and rear.

(2) Level

4 Installation

Table of Contents