Installing The Wire; Connecting The Wire - Origin Acoustics Director DSUB6 Series Installation Manual

4. Installing the Wire

Strip ¼ to ½ inches (6 to 12 mm) of the
insulation off both ends of the wire. To
avoid stray strands, twist them at the
0.25 - 0.5"
end. Connect the wire to the amplifier,
(6 - 12mm)
and make sure the wire connected to
the left speaker output will be routed
Speaker
to the left speaker, right output to right
Wire
speaker, etc.

5. Connecting the Wire

Insert the wires into the connectors,
making sure that the positive wire is
being attached to the red connec-
tion and the negative wire is being
Connector
attached to the black connection. If
the negative and positive wires are
Speaker
Wire
switched, speaker performance will be
drastically impacted.
8