Table of Contents
Advertisement
14.0 SAFETY INFORMATION
The CueScript model CSMV2 17", and 19" prompter monitors are not user serviceable. Please return to
CueScript in the event that servicing is required. After any servicing, the CueScript service centre will re-test
each prompter to ensure product safety is intact.
In no event should any modification be made to any CueScript prompter without authorization from
CueScript. Doing so without authorization will void the warranty and may affect the safety of the product.
15.0 WARNINGS
The following warning symbol and stipulation appear on the underside of the CueScript monitors:
The CueScript prompters utilize switching power supplies which inherently have high voltages appearing
within the circuitry. Specialized equipment and skill are required to service this equipment. Touching
anything on the inside of the cabinet with the cover removed can be extremely dangerous.
In addition, the following warning is given:
To minimise the risk of electric shocks or other hazards, the AC mains power cord must be connected to a
grounded/earthed supply.
There is another warning symbol near the DC power input XLR jack.
For 12 Volt DC operation, you must unplug the power source connector (4 pin XLR) to shut the monitor
down. The power switch on the IEC connector does not control the when the 12VDC input.
Before removing any cabinet part, you must remove both the 12 VDC power and the 100-240 VAC mains
power to ensure that the prompter is not powered up by either source.
SW Rev:1.25
WARNING: NO USER SERVICEABLE PARTS INSIDE
THIS EQUIPMENT MUST BE EARTH
24
GROUNDED.
Advertisement
Table of Contents
Need help?
Do you have a question about the CSM17 and is the answer not in the manual?