Table of Contents
Advertisement
•
Replace O-ring annually to ensure proper seal. Only use the official SeaLife O-rings designed for the
SportDiver underwater housing (Item # SL40010)). Replacement O-rings are available at your local
authorized SeaLife dealer, or online at www.sealifepartsdirect.com (USA Only).
•
Do not expose the housing to direct sunlight for prolonged periods of time. Keep housing in a shaded area
or under a towel to prevent it from overheating.
Do not disassemble or attempt to repair the housing as this will void your warranty. Contact your local
•
authorized SeaLife dealer or the SeaLife Service Center in your country for repairs.
Use the included lanyard to strap the underwater housing to your wrist or clip the housing to your BCD
•
(buoyancy control device).
Do not let any moisture or dirt get inside housing when opening. This may result in fogging when using the
•
camera underwater.
Store housing at room temperature in a clean and dry place.
•
51
Advertisement
Table of Contents
