Table of Contents
Advertisement
Display Brightness
This setting adjusts the screen brightness. It ranges from 1.0 (brightest) to 0.0 (darkest) in 0.1 step
increments. 0.8 is the default display brightness. Using a higher screen brightness makes it easier to see
the display in bright sunny conditions but also uses more battery power.
Leak Alarm
The leak alarm can be turned Off if you want to bypass the 3.5-minute leak analysis described on section
5. The default setting is On.
The SportDiver underwater housing features two leak alarms. One is the pre-dive vacuum pressure
analysis described in section 5. The app will display a leak alarm alert if it detects an internal pressure
change during the 3.5-minute leak analysis. This leak alarm may be turned Off.
The other leak alarm is a gold water sensor located on the inside bottom right of the underwater housing.
The app will display a leak alarm alert if water, or any conductive object, like your finger, touches the
sensor. This leak alarm cannot be disabled.
On-screen Settings
When turned ON, this will show the camera and exposure settings on the top or bottom of your phone
display. For iPhones, go to Settings and scroll down to SportDiver app. There you will see the option to
enable the on-screen settings.
System Reset
This will reset all the settings to the factory default setting without deleting any files.
44
Advertisement
Table of Contents
