Table of Contents
Advertisement
Power on your phone and open the SportDiver app. The app will display "Waiting for Connection". The nearest
phone with SportDiver app running will automatically connect to the housing. Please allow up to one minute for
the phone to connect to the housing. Once connected, the blue Power/Bluetooth LED will stop blinking and
turn solid blue, and the Bluetooth icon in the lower right of the display will turn from white to blue. Once the
housing has been connected, the app will display a pressure gauge. If so, proceed to the next step. If the
phone does not automatically connect, power Off the housing and repeat step 6. Make sure your phone is
close to the housing and the app is open.
Waiting for connection message
Once connected a pressure gauge is displayed
Note
21
Advertisement
Table of Contents
