Table of Contents
Advertisement
6. Ten medium-sized rubber grip tabs (A) have been pre-installed into the housing, as shown below. The
rubber grip tabs and bow-shaped spring hold the phone in position and prevent the phone from moving
around when the housing is sealed.
Important: Do not install grip tabs in areas where the phone's side buttons are located.
Exchange the medium-sized grip tabs with small or large-sized tabs depending on the size of your phone.
For larger phones, you may remove left-side grip tabs and only use small grip tabs along the bottom.
The grip tab end is tapered. Make sure to install the tabs with the longer side up and shorter side down,
which keeps the phone held down.
Rubber grip tabs
Pre-installed medium-sized rubber grip tabs (A)
14
Advertisement
Table of Contents
