Table of Contents
Advertisement
Apply silicone lube - Before installing the seal and
O-ring, clean them with a slightly damped, lint-free
cloth. Apply a thin film of silicone lube to both
seals. Use your fingertips to evenly spread the
lube. Do not stretch the O-seals.
Apply thin film of lube to the seals
Install the seal and O-ring – Clean the seals
grooves with a slightly damped, lint-free cloth.
Carefully install the seals making sure not to twist
the seals.
Be careful not to twist the seals when installing
Important: The main
seal is D-shaped. Make
sure the flat side is
facing inwards, towards
the groove, with the
rounded side facing out.
48
Advertisement
Table of Contents
