Table of Contents
Advertisement
•
Do not touch the gold water sensor located on the inside bottom right of the housing. That will cause the
Leak Alarm to activate and display a "Leak Detected" message. If that happens, power the housing Off
and repeat steps 6 through 8.
7. Insert the phone into the housing, close the waterproof door, and rotate the cam lock clockwise until it
stops and locks in place. Make sure not to trap anything in the sealing area when closing the waterproof
door.
Note
Do not touch the gold water sensor located on the inside bottom right of the housing. That will cause the
•
Leak Alarm to activate and display a "Leak Detected" message. If that happens, power the housing Off
and repeat steps 6 through 8.
It is normal for there to be a small gap between the waterproof door and the front housing after the door is
•
closed. Applying vacuum pressure in step 10 will close the gap.
22
Advertisement
Table of Contents
