Husqvarna EBE 500S Operator's Manual page 22

2. Install the impeller.
3. Block the blast wheel blades with an applicable tool
and install the bolt for the impeller.
CAUTION:
CAUTION:
install the bolt. It can cause damage to
the threads.
22
Always use a new bolt.
Do not use force to
4. Install the 2 screws, the 4 washers, the 2 cage
clamps and the control cage.
5. Install the 8 screws, the 16 washers, the 8 nuts and
the hopper.
To remove the blast wheel blades
1. Remove the impeller. Refer to
impeller on page 21 .
To remove the
2338 - 001 - 13.12.2023