pattern. Refer to
equipment on page 7 .
1. Open the separator door and look if there is abrasive
material in the hopper. If there is abrasive material
in the hopper, empty it. Refer to
material from the hopper on page 21 .
2. Disconnect the power plug.
3. Remove the 8 screws, the 16 washers, the 8 nuts
and the hopper.
4. Loosen the cage clamps.
2338 - 001 - 13.12.2023
Personal protective
To remove abrasive
5. Examine the position of the control cage window.
6. Turn the control cage clockwise, if the hotspot is too
much on the right side.
17