Table of Contents
Advertisement
Hose and cord lengths
Your services can be installed to either the left-hand or right-hand side
z
of the product in an adjacent cabinet. Refer to 'Cabinetry preparation'
for service access requirements.
The drain hose should not extend more than 4m. A longer drain hose will
z
cause reduced performance.
Water connection
The dishwasher should not be connected to a water system where there
z
is no temperature control, unless the system is fitted with a suitable
tempering valve.
The dishwasher must not be connected to an undersink high-pressure
z
push-through hot water system, as damage to the system will result.
Maximum water temperature: 60°C
z
This product has a 3/4 BSP connector water inlet hose. A 3/4" to 1/2"
z
inlet hose adapter has been supplied for your use if needed.
Ensure water connection complies with local plumbing regulations.
z
Water pressure
0.03-1MPa
z
Electrical requirements
230V, 50Hz, 10A
z
Anti-flood protection
This dishwasher has anti-flood protection, which will stop the water
z
flowing in the event of a leak within the machine.
PLUMBING & ELECTRICAL CONSIDERATIONS
d
e
f
SERVICE DIMENSION
A Length of drain hose
B Length of power cord*
C Length of inlet hose
D Distance from floor to top of hose support
E Minimum distance from floor to end of drain hoses**
F Minimum inlet hose radius
*excluding plug
**standpipe install illustrated. Distance is the same for all plumbing installs.
c
b
a
d
e
f
a
b c
LEFT SIDE
RIGHT SIDE
MM
MM
1650
1300
950
1450
1450
1300
750 – 883
750 – 883
500
500
200
200
9
Advertisement
Table of Contents
