Panasonic SC-HT790V Operating Instructions Manual page 42

RQT6951
IB
VCR --
AY4"
ENTER
MENU
Change the settings to suit your preferences and to suit the unit to
the environment in which it is being used. These settings are
retained in memory until they are changed, even if the unit is turned
off.
preparation
ePress [VCR] to put the remote control in VCR mode.
oPress [DVDNCR] to select "VCR" as the source.
Before changing the settings
Press [MENU] to
show the VCR
• LANGUAGE
MENU.
Select the language for these menus and other on screen displays,
While the VCR MENU is displayed
1
Press [A, Y] to select"LANGUAGE"
and press [ENTER].
2
Press [A, V] to
choose the
preferred
language.
eENGLISH (Factory
preset)
• ESPAI_OL
• FRAN(_AIS
Press [MENU] to confirm and return to the previous screen.
The clock is set automatically after Plug-in Auto Tuning (=, page 15),
Do the following if you want to set it again or if the time is not set
correctly.
While the VCR MENU is displayed
1 Press [A, y] to select"CLOCK SET"
and press [ENTER].
! AUTO CLOCK S ET
2
Press[A, Y]to
select "AUTO
CLOCK SET"
and press
[ENTER].
Auto setting starts. This can take some time.
To stop partway through
Press [MENU],
• If the unit couldn't set the clock automatically
The MANUAL CLOCK SET screen appears, Set the time manually
(I below],
I MANUAL CLOCK SET I
2
Press[A, Y]to
3
4
select
"MANUAL
CLOCK SET"
and press
[ENTER].
Press ['<, I_] to
select the item you want to change
and press [A, _'] to change the
setting.
Press [MENU] to start the clock and
exit the setting screen.
• Time reset function
To return the clock to the exact hour, wait until the clock in the
MANUAL CLOCK SET screen is within 2 minutes either side of the
hour (e.g., between 11:58:00 and 12:01:59) press [MENU] to clear
the screen. The clock changes to the exact hour.