Panasonic SC-HT790V Operating Instructions Manual page 52

The waU or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lb.) per screw.
1
Remove the stand. (SC-HT810V only)
BEFORE REMOVING THE STAND
eTake the speaker cable out of the stand's hole if it is
threaded through.
eLay the speaker on a soft cloth.
Unscrew the screw with a PhiUips-head screwdriver.
Preparation
Stand
2
Screw a screw (not included) into the
wall.
.Ji30-35 mm( 13/_6-_ 1=/8")
_)7.5-9.4 mm (_/_"-_la")
11 mm (3/8' - 71 s')
Wall
3
Vertical
o
o
Fit the speaker securely onto the
screw with the hole or holes.
Horizontal
$
m__J
• Remove the stand (SC-HT810V only -, step 1 above).
• Ensure the stands meet these conditions before purchasing them.
-Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
-The stands must be able to support over 10 kg (22 lb.).
-The stands must be stable even if the speakers are in a high
position.
Attach the stands
with these holes.
5 mm (W_"), pitch 0.8 mm (1/3_")
_mm (223/_")
_'_ _J _ Speaker stand
I _ (n°t included)
Plate thickness plus 7 to 10 mm
(plus 9/32"to _/_")
RQT6951
m