Panasonic SC-HT790V Operating Instructions Manual page 56

Before requesting service, make the below checks. If you are tn doubt about some of the check points or if the remedies indicated in the chart do
not solve the problem:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or
the website (http:/iwww.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www. panasonic.ca), or an
authorized Servicentre closest to you.
General
No response when buttons
)reseed.
The SETUP menu cannot be
accessed.
Cannot operate the TV.
C_ot operat_ the DVD.
Television reception worsens after
connecting the unit.
• Insert the AC power supply cords and system cab e secure y _:;;. ; :
• Some operations may be prohibited by the disc.
• The unit may not be operating properly due to lightning, static erectdcity or some other
external factor.
Reset procedure:
Press [_)] to switch the unit to the standby mode and then back to ON.
Alternatively, press [_] to switch the unit to the standby mode, disconnect both AC power
supply cords, and then reconnect.
oCheck that the batteries are installed correctly.
• The batteries are depleted: Replace them with new ones.
• Point the remote control at the remote control sensor and operate.
; •This function depends on software avallabllffy. _ ¸¸ _ ;: > _ _ ,_ _'_, : !_;
• Try selecting fr0m the:d _'S menu f One sava abe : _:: _:_i. :_._:_;_ i_ - _
• select "DVD" as the source•
• Cancel all group, program and random play
ePress [-FV] to swdch the remote control mode to TV
eCheck the TV maker setting.
' press [DVD] to sw_h the remoie control mode to DVD. 7 _
• This can occur because the signats are being divided between the unit and the television.
You can solve this with a signal booster, available from audio-visual supp![ers. Consult your
dealer if reception does not improve•
Page
L., ,
Disc play
No menu play•
The position of the subtitles is
incorrect.
Cannot change angle.
There are already markers, ri73_
Marke_numbers added are,
differe_ when i call them Up:
Cannot select random or program
play,
Folders deeper than the eighth
layer on a data CD are not
displayed correctly,
You have forgotten your ratings
password.
Reset all the SETUP settings to
Factory Preset.
The unit d_'_"_'_p]a-"y _th_ data type
=_MA/MP3 or JPEG ) selected in
Mixed Dl_Aud|o & Stills" In the
SETUP menu_,: ;:_. • _ 3:
if the side to l_e
g recorded on t. _
• This function depends on software availability.
This function depends on software ava_ab_tv .... ,_ ,
•Subtitles are cleared from the telews_on,: D_splay the subtitles o_ #z_&
eSubt tie posrborl swTong Ad ust he posit_on : '&_- ;_ t
• Change the position of the subtrtles wnth "Subtitle Position" in the on-screen icon menus.
This function depends on software aval abl ity. : :-' i't_= _
; 2
?
• This function depends on software availability Even it a disc has a number of angles
recorded, these angles may be recorded for specific scenes only.
• You cannot add markers wh e pay ng a pay _st or if the d_se s pay t me doesn t appear on
the unit's display;., ' ....
. . t
• The unit reads and displays the markers added with a OVD video recorder You can clear them
but reappear when you switch the unit to standby, change the source, or open the disc tray•
• The unit numbers _tarkers by time so they change when you add and delete them
• You cannot select random or program play with some DVD-Video
• Folders deeper than the eighth layer are displayed as the eighth layer.
• Whde stopped and "DVD" is the source, press and hold [<< (.,:_VREW], [1_ PLAY] (OVD)
and [_DVO OPEN/CLOSE] on the main unit for about 3 seconds until "Initialized"
d,sappears from the television. Turn the unit off and on agmn
All settings will return to the default values
open the tray, thonpress ),.] PLAY) to start play. ' '-,:.._41 ", "'' . .:_ :
26
26