Panasonic SC-HT790V Operating Instructions Manual page 39

I To check, and cancel timer
correct,
programs
• To check a program
1
Press [PROG].
The timer-programming screen appears.
• To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and
press [ENTER].
2 Select the item with [.<, I_] and correct it with [&, V].
• To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
I Auto SP/EP change I
The unit switches tape speed to EP if it determines there is not
enough tape to record the entire program in SP mode. The change
may start at the beginning of the recording or part way through,
depending on the remaining tape.
Before using this function, set the length of the tape you are using
(-, page 44). It may not work correctly if you use tapes with irregular
lengths.
Example program combination
(when using a 60-rain.
tape)
This function does not guarantee recording of the entire program.
RQT6951