Table of Contents
Advertisement
Using the built-in
light
You can use the built-in
light to suit your shooting
situation.
The recommended
distance
between
the subject and carncorder
is about 1.5 m(5 feet).
Press LIGHT until the {_0_
indicator
appears
on the screen while vour camcorder
is
in CAMERA
mode. The built-in
light turns on.
If you turn the POWER
switch to OFF (CHARGE),
the built-in
light turns off
sinmltaneously.
You cannot turn the built-in
light on by turning
the POWER
switch to
CAMERA
again. To turn on the built-in
light again, press LIGHT again in CAMERA
nlode.
LIGHT
To turn
off the built-in
light
Press LIGHT until no indicator appears on the screen.
To turn
on the
built-in
light
automatically
Press LIGHT until the {_
indicator
appears
on the screen.
The built-in
light automatically
turns on and off according
to the ambient
brightness.
Be careful not to touch the lighting
section, because the plastic window
and
surrounding surfaces are hot while the light is on. It remains hot for a while after
the light is turned off.
Not to be handled
by children.
Emits intense heat and light.
Use with caution to reduce the risk of fire or injury to persons.
Do not directly light at persons or materials from less than 1.22 m (4 feet) during
use and until cool.
Turn the built-in light off when not in use.
When you press LIGHT
The indicator
changes
as follows:
no indicator
52
Advertisement
Table of Contents
