Table of Contents
Advertisement
Dubbing
a tape
Using
the
i.LINK
cable
(DV
connecting
cable)
Simply connoct
tho i.LINK cablo (DV connocting
cable) (optional)
to
DV IN/OUT
and to DV IN/OUT
of the DV products.
With digital-to-digital
connection,
video and audio
signals are transmitted
in digital form for high-quality
editing.
You cannot dub the screen indicators.
(1) Insert
a blank
tape (or a tape you want
to record
over) into the VCR, and insert
the recorded
tape into your camcorder.
(2) Set the input
selector
on the VCR to DV IN if it is available.
Refer to the
operating
instructions
of your VCR for more information.
(3) Set the POWER
switch
to VCR.
(4) Play back the recorded
tape on your camcorder.
(5) Start recording
on the VCR.
Refer
to the operating
instructions
of your VCR for more
information.
DV IN/OUT
(opti
czd2x : Signal flow
DV IN/OUT
When
you have finished
dubbing
a tape
Press • on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable).
Soo page 94 for more infornmtiort
about i.LINK.
The following
functions do not work during digital editing :
Picture effect
- Digital effect
Tape PB ZOOM
If you record a playback pause picture via the _, DV IN/OUT jack
The rocorded
picture
bocomos rough.
Also, whon you play back tho recorded
pictures
on other video equipment,
the picture
may jitter.
64
Advertisement
Table of Contents
