Table of Contents
Advertisement
Types of trouble
and their
solutions
Symptom
Cause and/or
Corrective Actions
The power does not turn on.
• The battery
pack is not installed,
or is dead or nearly dead.
÷ Install a charged
battery
pack. (p. 11, 12)
• The AC power
adaptor
is not connected
to a wall outlet.
÷ Connect
the AC power
adaptor
to a wall outlet. (p. 15)
The end search function does not
• The tape was ejected after recording.
work.
• You have not recorded
on the new cassette
yet.
The end search function does not
• The tape has a blank portion
in the beginning
or middle.
work cor c_ctl}:
The battery pack is quickly
• The operating
temperature
is too low.
discharged.
• The battery
pack is not fully charged.
÷ Charge
the battery pack fully again. (p. 11, 12)
• The battery
pack is completely
dead, and cannot be
recharged.
÷ Replace with a new battery
pack. (p. 11)
• You have used the battery
pack in an extremely
hot or
cold environnrent
for a long time.
• The battery
pack is completely
dead, and cannot be
recharged.
÷ Replace with a new battery
pack. (p. 11)
• The battery
pack is not fully charged.
÷ Charge
the battery
pack fully again. (p. 11, 12)
• A deviation
has occured
in the remaining
battery
time.
÷ Charge
the battery pack fully again. (p. 11, 12)
• A deviation
has occured
in the remaining
battery
time.
÷ Charge
the battery
pack fully again. (p. 11, 12)
The remaining
battery
time
indicator
does not indicate
the corr_ct
time.
The power
goes off although
the
remaining
battery
time
indicator
indicates
that the battery
pack has
enough
power
to operate.
The cassette
cannot
be r_!moved
from
• The
power
source
is disconnected.
the holder.
+ Connect
it firmly.
(p. 12, 15)
• The
battery
pack
is dead.
÷ Use
a charged
battery
pack.
(p. 11, 12)
The [] and
_ indicators
flash
and no
• Moisture
condensation
has occurred.
functions
except
for cassette
ejection
_ Remove
the cassette
and
leave
your
camcorder
for at
work.
least
1 hour
to acclimatize.
(p. 97)
Remaining
tape indicator
is not
• The
[i_
REMAIN
is set to AUTO
in the menu
settings.
displayed.
÷ Set it to ON
to always
display
the remaining
tape
indicator.
(Continued
on the followingpag_)
O
87
Advertisement
Table of Contents
