Using The Video Light (Hdr-Cx360/Cx360V/Pj30/Pj30V); Recording In Mirror Mode - Sony HDR-PJ50V Operating Manual

Using the Video Light (HDR-CX360/
CX360V/PJ30/PJ30V)
You can use the Video Light depending on
the surrounding condition. Keep a distance
of about 0.3 m to 1.5 m (1 foot to 5 feet)
between the camcorder and the subject
when you use the video light.
LED Video Light
Each time you press the LIGHT button, the
indicator changes as follows.
No indicator (Off) 
(On)  ...
Press the LIGHT button repeatedly to
cancel the Video Light.
 Notes
The Video Light generates strong light. Do not

use the Video Light directly in front of the eyes
at close range.
The battery drains quickly while using the

Video Light.
Tips

You can adjust the brightness of the Video Light

using the [Light Bright] menu (p. 86).
When the Video Light is set to

the video light may turn on and off repeatedly.
In such a case, press LIGHT repeatedly to select
(On).
When you take photos, the video light is turned

off and acts as the flash.

Recording in mirror mode

Open the LCD panel 90 degrees to the
camcorder (), then rotate it 180 degrees
to the lens side ().
Tips

A mirror-image of the subject appears on the

LCD screen, but the image will be normal when
recorded.
(Auto) 
(Auto),
US
1