Extreme Networks IA-A-20 Installation Manual page 17

Please enter the minutes [34]:
Please enter the seconds [34]:
9 In the Use UTC screen, select whether you want the system clock to be set to use UTC.
=================================================================
Use UTC
=================================================================
The system clock can be set to use UTC. Specifying no for using UTC,
sets the hardware clock using localtime.
=================================================================
Do you want to use UTC (y/n) [n]?
10 In the Set Time Zone screen, select the appropriate time zone and press [Enter].
=================================================================
Set Time Zone
=================================================================
You will now be asked to enter the time zone information for this
system. Available time zones are stored in files in the
/usr/share/zoneinfo directory.
Please select from one of the following example time zones:
1. US Eastern
2. US Central
3. US Mountain
4. US Pacific
5. Other - Shows a graphical list
=================================================================
Enter selection [1]:
11 In the Current Appliance Configuration screen, review the current settings and press [Enter] to
continue.
NAC Gateway Configuration:
Host Info:
Gateway/Name Server/Domain:
SNMP User/Auth/Privacy:
NetSight Server IP:
Press [enter] to continue:
12 In the Appliance Network Configuration Complete screen, you can accept the current configuration
or modify the settings.
=================================================================
Appliance Network Configuration Complete
=================================================================
Configuration of the appliance network settings is now complete.
Enter 0 or any key other than a valid selection to continue.
If you need to make a change, enter the appropriate number from
the choices listed below.
=================================================================
0. Accept the current settings
1. Edit NAC Appliance settings
2. Edit SNMP settings
3. Edit date and time
4. Modify all settings
=================================================================
Enter selection [0]:
When you see the following screen, configuration is complete.
IA-A-20 and IA-A-300 Installation Guide
<hostname>/<IP address>/<netmask>
<gateway>/<dns server>/<domain>
snmpuser/snmpauthcred/snmpprivcred
<netsight server ip>
Configuration
17