Extreme Networks IA-A-20 Installation Manual page 15

the item is either (Required) or (Optional). The [enter] key may be
pressed without entering data for (Optional) items. A value must be
entered for (Required) items.
At the end of the setup process, the existing settings will be
displayed and opportunity will be provided to correct any errors.
=================================================================
Press [enter] to begin setup or CTRL-C to exit:
2 Press [Enter] to begin the setup.
The Root Password Configuration screen appears:
=================================================================
Root Password Configuration
=================================================================
There is currently no password set in the system administrator
account (root). It is recommended that you set one that is active
the first time the machine is rebooted.
=================================================================
Would you like to set a root password (y/n) [y]?
3 Press [Enter] to set a new root password. Enter the new password as prompted.
Enter new UNIX password:
Retype new UNIX password:
Password updated successfully.
4 In the NAC Gateway Configuration screen, enter the requested information for each line and press
[Enter].
=================================================================
NAC Gateway Configuration
=================================================================
Enter the hostname for the appliance [nacappliance]:
Please enter the IP address for <hostname> (Required):
Enter the IP netmask [255.255.255.0]:
Enter the gateway address [192.168.2.1]:
Enter the IP address of the name server (Optional):
Enter the IP address of an alternate name server (Optional):
Enter the domain name for <hostname> (Optional):
Enter the IP address of the NetSight Server (Required):
5 In the SNMP Configuration screen, enter the requested information for each line and press [Enter].
=================================================================
SNMP Configuration
=================================================================
The following information will be used to configure SNMP management
of this device. The SNMP information entered here must be used to
contact this device with remote management applications such as
NetSight Console.
=================================================================
Please enter the SNMP user name [snmpuser]:
Please enter the SNMP authentication credential [snmpauthcred]:
Please enter the SNMP privacy credential [snmpprivcred]:
IA-A-20 and IA-A-300 Installation Guide
Configuration
15