Table of Contents
Advertisement
Fault
Water leaks from the
bottomof the appli-
ance.
Foam escapes
from detergent drawer.
Several attempts to
start spinning.
Washing results not-
satisfactory.
Detergent residues on
the washing.
Grey residues on the
washing.
Programme termi-
nated unexpectedly.
Drying result
notsatisfactory.
Spinning during
drying.
Possible cause
Supply hose screw connection isleaking. Tighten the screw connection.
Drain hose is leaking.
Too much detergent has been used.
Not a fault.The unbalanced load detec-
tion system attempts to redistribute an
unbalanced load by starting to spin sev-
eral times.
Uncleaned areas worse than expected.. s(Prewash)
Too little or incorrect detergent used.
Maximum load exceeded.
Some phosphate-free detergentscon-
tain water-insoluble residues whichap-
pear on washing as light specks.
Soiling caused by ointments, grease
oroil.
Press the Start/Pause I button
elected accidentally.
The laundry clings to the sides of the-
drum after being spun
Closed tap
Selected drying time too short
Maximum or minimum load not taken
into account
No fault
Faults and what to do about them
Remedial Action
Have the Drain hose replaced by
theafter-sales service.
Only use detergent which is correct
for textiles, and suitable for use in
automatic washing machines. Make
sure that you use the correct dos-
age.
Always wash large and small items
together.
Pretreat stains if necessary.
Use the correct dosage of a suitable
detergent, in accordance with the
manufacturer's instructions.
Select the load appropriate for the
programme.
Rinse the laundry again or change to
using liquid detergent. Brush the
laundry after it has dried.
Wash the laundry using the maxi-
mumdetergent dosage and the maxi-
mumpermissible temperature – see
thecare label.
Turn on the tap.
Loosen up the laundry by hand; start
the drying programme.
Turn on the tap
Select the drying time according to
the Load.
Once the programme has ended:
adjust the load quantity, select a suit-
able drying programme and restart.
"Thermo spin", which is for energy-
efficient drying, starts after a drying
time of approx. 10 minutes.
en
47
Advertisement
Table of Contents
