Table of Contents
Advertisement
Public names
10.2.4
Allows you to manage Public Names list, and restricts calls to this list via the Call
restriction option.
This feature is subscription dependent and requires a PIN2 code.
Public names: Allows you to review, edit and modify your Public Names list via a PIN2
code.
Call restriction: Allows you to restrict calls to the Public names list when Public only is
selected.
Call barring
10.2.5
This can be applied to Incoming calls (All calls or When roaming) and/or to Outgoing calls
(All calls, International calls and Intl. Exc. Home). In both cases, the Cancel option applies
to all calls at once. The Status option lets you know whether a type of call is barred or not.
This feature is network dependent and requires a specific call barring password supplied
by your service provider.
10.3. Network
Contact your phone operator for full information about GPRS availability and an
appropriate subscription. You might also need to configure your phone with the GPRS
settings supplied by your operator, by using the menus described in this section. Then
select the bearer (GSM or GPRS) in the menus of each application to be used.
Access settings
10.3.1
This menu allows you to create different data profiles that can be used for connecting to
various services: for example, when using WAP or when sending MMS, the selected
profile will be used to connect to the GSM or GPRS network.
Options described below are operator and/or subscription dependent. Error messages
during connections are mainly due to incorrect parameters: contact your operator before
first use, in order to have the appropriate settings, which you may receive by SMS in some
cases. Some pre-configured profiles might be locked, preventing re-programming and
renaming.
Select an item in the list and press [OK] to access the following options:
Change name: To rename the selected profile.
Show: To display all parameters of the selected profile
GSM Settings: To change the GSM settings:
•Login & Password,
•Phone number needed to establish the connection and provided by your operator (ISDN
or Analogue),
•Inactivity time, a value of over 30 seconds after which the phone disconnects
automatically (if a connection was in progress).
36
Advertisement
Table of Contents
