Vibra Alert; Silent; Security; Keypad Lock - UTStarcom GPRS1229 User Manual

Utstar gprs1229: user manual
Table of Contents

Advertisement

Vibra alert

10.1.7
Allows you to set the vibra alert On or Off when receiving a call, when an event set in
the organizer is due, when you receive a message and when the alarm rings. The vibra
alert is always Off when you connect the charger.

Silent

10.1.8
When this mode is On, all alerts are deactivated and the vibra alert is active.
The Silent mode also applies to key tones.

10.2. Security

This menu allows you access the features relating to the security of your mobile phone
and the stored data.

Keypad lock

10.2.1
When the keypad lock is on, calls still may be possible to the official emergency number
programmed into your device. Dial the emergency number and press Green Key. Use the
keypad lock to prevent the keys on the cover phone from being accidentally pressed. To
lock the keypad, press and hold the right softkey. To unlock the keypad, press and hold
the right softkey.
Keypad lock options include:
▪ Off
▪ Lock now
▪ After 1 minute
▪ After 2 minutes
▪ After 5 minutes

Change codes

10.2.2
Allows you to change your PIN and PIN2 codes, as well as the call Barring code.
Depending on your SIM card, some features or options may require a PIN2 secret code
given to you by your operator.
If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it, request the
PUK code from your operator or retailer. If you enter an incorrect PUK code 10 times in a
row, the SIM card will be blocked and unusable. If this happens, contact your operator or
retailer.

PIN protection

10.2.3
This allows you to turn the PIN protection On or Off. When On, you will be asked to enter
your PIN code when turning your phone on.
You cannot change your PIN code if this option is Off.
35

Advertisement

Table of Contents
loading

Table of Contents