Settings; Sounds - UTStarcom CDM8932 User Manual

SETTINGS

SETTINGS

SOUNDS

Sets sounds for Ringer Type, Volume, Alerts,
Roam Ringer and Power On/Off.
RINGER TYPE
RINGER
To select a ringer type for incoming calls:
1. Press [MENU]
2. Select one of the pre-installed 8 music bells and
5 ring tones.
3. To confirm, press
MESSAGES
To select a ringer type for incoming messages:
1. Press [MENU]
2. Select a tone (Tone 1 - Tone 5).
3. To confirm, press
VOICE MAIL
To select a ringer type for incoming voice mail:
1. Press [MENU]
2. Select a tone (Tone 1 - Tone 5).
3. To confirm, press
Page 56 - Chapter 4
.
[OK].
.
[OK].
.
[OK].
SETTINGS
SETTINGS
VOLUME
Controls the Ringer, Key Tone, Voice Call and Speaker
Phone volume you to incoming calls in a variety
of modes.
RINGER
Controls the Ringer volume and alerts you to incoming
calls in the following modes.
1. Press [MENU]
2. Select one of the following options:
G Silent: Mute the ringer, press
G Ringer Off
G Vibrate On
G Ringer Mode: Volume Level 1 - Level 5.
G High & Vib: The ringer sounds with vibration.
G Vib to High: The ringer sounds after vibration,
press
3. To confirm, press
KEY TONE
To adjust key pad tone:
1. Press [MENU]
2. Adjust the key pad tone.
G Off/Level 1 - Level 5 (MIN-
3. To save, press [OK].
.
[MIN].
[MAX].
[OK].
.
, MAX- )
Chapter 4 - Page 57