Table of Contents
Advertisement
Device Information and Software Update
To view the current device information:
1. Select Device on the Touchscreen.
2. Select About – Displays device serial number, software, firmware, and TPMS
version.
To update the TS58R software:
1. Go to www.bendpak.com/trusensor
2. Download the most recent compressed software update file to your computer.
3. Decompress the software update to a new folder on your computer. A text file and a
data folder should have been downloaded into this new folder.
4. Verify the TS58R is shut down.
5. Connect the TS58R to your PC through the USB-C cable.
The following instructions will appear on the
TS58R screen:
U disk Mode
Update steps:
1. Run PC Update Program.
2. Unplug the USB after update is complete.
Precautions:
1. Do not connect to the OBD during this
process.
2. Do not press any keys on the TS58R
while updating.
6. Verify the computer can recognize a path to the TS58R internal SD Card.
7. Copy the current text file and data folder to your computer's hard drive or back-up
drive. This copy is a backup in case of a transfer problem with the software update.
8. Delete the current text file and data folder on the TS58R SD Card.
9. Replace the old text file and data folder with the new files just downloaded by
copying and pasting, or click and drag the new files to the SD Card.
10. Unplug the TS58R and press the power button to start the device. Verify correct
operation. Software update is complete.
Software Update Log
TS58R
SW Version
Firmware Version
TPMS Version
TS-58R TPMS Diagnostic Tool
Version
26
Date
5900313 - Rev. A - March 2023
Advertisement
Table of Contents
