Location (Position) Learning - Ranger TruSensor TS58R User Manual

Location (Position) Learning

Three methods are provided to store the TruSensor Location in the Vehicle's Tire
Pressure Module: Stationary, Automatic and OBD. On some vehicles the Location
Learning function may be completed by driving the Vehicle.
Location Learning - OBD
1. After Vehicle selection, select
Location Learning
3. Read the TPMS Learning Guide
carefully and select Confirm to
continue, Cancel to exit
A green check mark
successfully with the TS58R. Tire position, ID, pressure, temperature, and battery
status will appear in a table. A red
Sensor Activation Repeated.
TS-58R TPMS Diagnostic Tool
Note: If you selected
Confirm in step 2 above
using previously stored
data, there is no need
to activate the sensors
again.
will appear next to Sensors that have communicated
X indicates a failed communication. A red
22
2. Select Confirm to use previously stored
data or select Cancel to use new data.
4. Select to activate all TruSensors
on the Vehicle separately.
5900313 - Rev. A - March 2023
! indicates